spinFAB project cars

We are pleased to present some of the spinFAB design studio family builds:

Project Fairlady

Hello, I am Vince, the guy behind the introduction of spinFAB design studio and this is one of the long term projects, ’90 Fairlady Z. I will be updating this post little by little, as i have been building this vehicle extensively for almost the past 9 years. So as you probably figure, there is a lot of detail that went into this build.

As an Architect/ Designer, my philosophy for this project has always been the same. Simplify the Z as much as humanly possible, as I am a sucker for clean lines, and minimalist styling, but all while pushing the boundaries with pretty much every aspect of the car, most notably the boundaries in terms of the way the car sits. From one off suspension parts, to overly aggressive wheels and track tires, the car sits super low and wide. An almost menacing stance.

I love when people respond to pieces i have designed, whether the interior, exterior, or suspension by saying “wow i had no idea it didnt originally come like that.” To me, this makes for a well thought out build, where aftermarket can blend with one off parts I designed and all in conjunction with the original and not look slapped on. But this all lies within the details. The details are what separates a real “build” from just another project

One main thing to discuss is that the Z is primarily wearing its original paint at 23 years old, and has a tick over 60k at the current time. The car has been built by me, in my garage, and all of the one off pieces and designs have been planned and executed right in that garage by myself and my close friends. I love experimenting with new materials and techniques, and everything from the interior, to the bay shave and motor build has happened after months of design and planning.

here are a few initial pictures just to hold you over as I add to this over the coming weeks..

if you want to see some more information on the ’10-’11 year long portion of the build, head over to stanceworks for the recent build thread:


some more pics from the recent event First Class Fitment this past weekend where she took home the most prestigious award of the show. “Best Fitment”:

recent pictures from the Super Street Magazine feature

and some of the shots from Dave Tormey photography in 2012

and one with the Recaro made Carbon fiber fixed backs originally from the porsche carrera GT

Project e21

so far, about 6-7 months in on this build since we acquired it from its original owner. We were looking for a car that had vintage style and simplicity, and as soon as we pulled up, we knew this was it..

its a ’79 bmw 320i, and its going to be a platform we develop a few products for as we see how low and clean we can get this thing. The initial thoughts were to restore the interior, euro bumpers and a little body simplification, and the main thing.. suspension and wheels. one off air suspension developed for the car as well as a few sets of wheels custom made to graze its fenders.

pics to come shortly… for now a little of the progress. frame on floor soon

slightly more recent

project e36m

Collaboration on a good friend and fellow wheel snob, Walt and Karyns e36m. Subtle clean daily driven ride thats been built to be driven hard, drag frame, and show with the best of them..

project Vaporado

A huge amount of work over the past few months went into the planning and building up of the re-debut of the vaporado build. Every little detail, new motor build, finishes, interior, and to cap off the debut, about a year and a half of planning for you guessed it: our very own wheel line Invitational.SpinFab #001.

Walt put the corrado in the garage about 2.5 years ago with a damaged VR big turbo motor and a huge look of disgust across all of our faces. It took a while, but we decided about a year later, that the car was done looking sad in the corner of the garage and a much needed re-debut would be huge… and so far it has been just that. A huge undertaking, but a huge debut to finish off 2013.

The Vaporado project started for Walt just about a decade ago when this particular corrado (yellow ’91 G60 car), went over to the dark side with a much more potent VR powerplant. This was pretty much the starting point of the build as we know it. The VR was good for a little while, but soon needed a large turbo to complement the motor build, and it went on from there. The mod list had grown to be a few pages long between 2004-2011. The body panels became wider, color (vapor blue) was shod on every panel, interior was stripped out and built to aim toward its future track use, bay and the body was stripped down and shaved to perfection to create a very simple silhouette to match the powertrain. With all of these details getting attention, it remained very clear from the start that the car was never meant to be a non driven show queen… The current burn marks on the firewall from the turbo and the exhaust stained rear bumper show that thing has always had its hand in activities of the fun kind.

Fast forward a few years and a few VR motors later to that 2011 moment when the car stood lifeless in the corner of the garage, and when all of the VR rebuild options seemed illogical as none held up to the task (almost as if cursed), it was decided over some drinks that the car would get a new powerplant… a 1.8t build of sorts. and that is where the plans started getting interesting for us. We knew that going direction of a different motor (never intended for a corrado) would mean basically changing and fabricating just about every detail over on this build. But thats the fun in a build which keeps everything interesting.

The car underwent a ton of fabrication work, full bottom end up motor build to a little over 2.0l in size, full ferrea valvetrain, cams, custom one off 62/62 turbo setup with custom tubular manifolds, intercooler setup, water meth, etc.. all done by a good friends shop, FFE Racing. Then lots of wiring, management, and details had to be sorted through prior to the eventual start up and tuning time. The car wound up being a test subject for Lugtronics standalone tuning along with Kevin Black, the master at the computer. It is amazing the level of specificity one can set up for just about every parameter in order to get this thing to perform at its fullest potential. Very very nice to be able to do things like plug a laptop in and make modifications to things like curing an erratic idle just minutes before leaving for a 5 hour drive.. ask us how we know

specifications list
Motor/Turbo Specs:
AEB 1.8T to 2LT Stroker
FFE Racing Custom Intake Manifold
FFE Racing Custom Tubular Topmount Vbanded Turbo Manifold
Precision 6262 Billet Turbo
Precision 46mm Wastegate
Tial Q 50mm BOV
FFE Racing Custom Intercooler Plumbing with Precision Core
FFE Racing Swirlpot
JE Pistons 9:5:1
IE Rods
Calico Bearings
ABA Crank
Full Ferrea Valvetrain
Cat Cams 3658′s
Cat Cams Adjustable Cam Sprocket
Injector Dynamics 1000cc Injectors
ARP Hardware
FFE Racing Custom Fuel Surge Tank
FFE Racing Custom Stainless 3″ Exhaust
ECU/ tuning through Lugtronics standalone_Kevin Black
Trans Specs:
O2M 6-Speed
Clutchmasters FX400
Clutchmasters Lightweight Steel Flywheel
Wavetrack LSD with ARP Hardware
H&R Ultralow custom s/r
r32 control arm bushings
seam welded and reinforced rear subframe
manual steering conversion
anti rear roll bar
wrd lower front strut brace
ABS system removed
DE calipers/audi tt front rotors
mkiv rear brake setup
recaro fixed back buckets
autopower 4 point roll cage
sparco camlock 5 point harnesses
euro rear parcel shelf
a/b pillars for manual seatbelt
beetle vapor blue exterior color
metal widened fenders
slc bonnet with welded in mkII vents
shaved front bumper
shaved rear bumper
90mm euro chin spoiler
smoothed bay..
side moldings shaved
abt side skirts smoothed and trimmed
wipers shaved
passat b4 sunroof

The corrado a few years back was sitting on a set of color matched Schmidt 3 piece modernlines. The vapor blue/polished combo matched the car beautifully, but tended to sway the cars overall look away from the raw, violently powerful driver that the car is. This is the the reason for sorting out the last of the major details… the suspension components and wheels. A new set of coilovers with dampening to match the higher spring rate replaced the outdated set on the car. All while the in house design/ engineering was going on for our spinfab 012/012a. The 16″ 012 was originally designed around this build, and were designed in a way to capture and mimic the rawness of the corrado build. Just like the car, the wheel design evokes a simplicity in its design to simulate rotational movement almost as if cutting through the air like a spinning saw blade, but while up close showing off its complex machining path to route out each of the 12 triangular windows. The wheels needed to have that same look and feel as the car.

3 piece forged 6061 t6 faces, radially hand brushed and reverse mounted behind our forged wheel halves that are mirror polished and chromed stainless steel assembly hardware to top it all off.

many thanks to Jon Schusteritsch for the wonderful shots as always

The finish on the faces is hard to describe unless one sees it in real life. Again, subtle and raw on purpose. The faces were powdercoated a 2 stage metallic silver to cover the triangular windows of the face. Next, the flat part of the face was then machined back down to raw aluminum, and radially brushed with a heavy grit paper to keep the heavy circular brush marks on the aluminum. Gloss clear powder could have been the final touch, but it needed just a little more. So in with the gloss clear powder, we mixed in a bit of blue and silver metallic flake. By being shot with the clear, its a very subtle difference, but when the sunlight hits the wheels face, it becomes apparent the wheels are not raw aluminum. Also keeps upkeep to a minimum as it needs a nice soap and water bath to keep the wheels looking perfect after some heavy use. Sized in at 16×9 and 16×9.5, the wheels are wide enough to get some grip to the ground, but not overly wide for no apparent reason. Camber set at about -2 degrees all around for that same reason, no excessive camber to adversely affect anything. It is a fwd car, so keeping the wheels close to square with some decent sized rubber was a must. no need for a 12″ wide rear wheel dragging around out back for no purpose at all..

Since we are on the subject of brushed aluminum wheel faces, it was only right that the wheel faces started a trend that made its way into the engine bay. Most of the engine bay aluminum fabricated bits were pulled back off once the motor had a few hundred miles on it, and hand brushed/ powdercoated with the same treatment to keep all in line aesthetically.

One of the best parts about this car is that outside of the vw community (and even inside of it sometimes) most have no idea what this thing is as it screams past you in the left lane.

6 thoughts on “spinFAB project cars

  1. Hello Vince,
    Ever since I first stumbled upon the Stance website and your build of the 300zx. I have been in awe of the dedication, drive, vision, attention to detail… the documentation.. the LOGIC .. so evident in the fluid progression from one idea to the other.. sheer genius. I stand and applaud your unconventionality and audacity.
    I own a 300zx and would love to duplicate/imitate a couple of the less radical mods that would improve the zx’s shortcomings. For example the intake manifold #6 runner, and Koyo radiator electric fan conversion. Trouble is, I do’nt have either the equipment, welder, bandsaw, or the cajones to undertake such a mod. Maybe you could do an indept write up, for sale, not free; or start a side business modding the zx intake manifold. I would’nt hesitate to ship my manifold to LI for such a mod, plus the deletes.
    I have an idea for the zx that I have not seen expressed in the thread and that is converting the power steering to electric. Just a thought.
    I would love to own a set of BBS RS wheels to dress up my zx. Presently I am almost stock… 17x8F/17x9R .. 35 offset, Michellin 225/45/17 front and 245/45/17 Rear. I love the deep dish concave look, and would greatly appreciate any reccomendations that you could give as to size, offset, to achieve that look. And could you build such a set..? And make it affordable.?
    I apologize for being such a blowhard and for taking up so much of your time, but I hope you will take a few minutes more to shoot me a reply. I would really appreciate a response, thanks, Dave.

Leave a Reply to Tyrone Cancel reply

Your email address will not be published. Required fields are marked *


You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>